Filter By:
- Accessories/Parts (159)
- Hitch-Mount (62)
- Pickup/RV/Spare-Tire Mount (23)
- Roof-Mount (66)
- Trunk-Mount (18)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks

$33.99
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.

$30.00 - $32.00
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is just what it sounds like – an anchor point to securely connect a cable loop to your car. The Cable Anchor – Window, slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375-inch hole to thread a cable lock through. The Cable Anchor - Window, is not recommended for tinted windows.

$29.99
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. Interchangeable plugs fit into an anodized aluminum extrusion (sold separately). These interchangeable plugs fit into an anodized aluminum extrusion (sold separately).
Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

$29.99 - $34.99
The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately).
Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

$489.00
2019 Model Mini Bomber comes standard with our Universal Huske Fork Mount upgrade, with 9mm plugs and quick release skewer. The Mini Bomber is probably our most versatile model. This 2-bike fork-mount rack is designed to attach to your car’s roof, trunk, or your SUV’s back glass. The HDPE body flexes to conform to your car’s curves. With four 6-inch SeaSucker vacuum mounts, this rack has plenty of muscle. Fits on virtually any car. Minimal assembly required.

$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

$10.00
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

$498.00 - $629.00
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on.
- Re-designed pivot with optional foot assist
- Semi-integrated bike lock
- Front tire ratchet design with an intuitive release
- Rear tire cradle features a co-molded strap to protect wheels
- Folding front cradle adds space between rack and vehicle
- No-tool install with hand tight hitch cam system
- Gloss metallic powder available in 3 colors
- Low profile arced design delivers an amazing look
- 2 Bike capacity up to 40 lbs. each
- Holds wheelbases up to 47-inch and tires as large as 3-inch
- Increased spacing between bikes to 14-inch
- Lightweight platform rack design as low as 32lbs (assembled)
- Available in both 2-inch & 1.25-inch hitch sizes

$449.00
The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price.
- Flatlock cam for 2", ball cam for 1.25"
- Includes semi-integrated bicycle cable lock
- Tamper-resistant hitch security
- More robust hitch design for enhanced stability in tow
- Holds up to a 50" wheelbase bike (previously 47")
- Holds wheels 18"-29" (previously 20"-29")
- Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes
- Automotive-grade 750 hour salt spray hardware
- Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

$65.00
12 x 100mm fork adapter for use with 9mm fork-mount bike racks.
- 12mm x 100mm
- Axle not included. Works with your bike's thru-axle
- Built-in safety tabs
- Durable black powder-coat finish
- All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts
Product Specs:
- Weight: 0.41 lbs.
- Dimensions: L 4.50 in x W 1.25 in x H 4.00 in
- Limited Lifetime Warranty

$65.00
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount.
- 15mm x 110mm
- Axle is not included. Works with your bike's thru-axle
- Built in safety tabs
- Durable black powder-coat finish
- All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts
Product Specs:
- Weight: 0.40 lbs.
- Dimensions: L 4.50 in x W 1.25 in x H 4.00 in
- Limited Lifetime Warranty

$229.00
Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

$45.00
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

$399.00
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)

$72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

$295.00
Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

$275.00
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy.
Product Details:
- Easy to reach low profile height position makes it easy to rack out and reach gear
- Comes with four towers
- Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately)
- Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze
- Best-in-class, maximum on-road rating of 300 lbs.
- Maximum off-road rating of 180 lbs.
- Built to last, with engineered aluminum construction and durable powder-coat finish
- Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple
- T-slot attachments make adding gear mounts and accessories fast and easy
- Designed and tested for all common truck beds
- Integrated SKS (Same Key System) locks the rack system to the truck bed
- Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles
Product Specs:
- Weight: 8.01 lbs
- Dimensions: L 5.50in x W 4.25in x H 7.00in
- Some assembly required, 30 minute install

$129.00
An easy way to make load up less of a chore, the BoatLoader EVO telescopes out 28" from your roof rack to help get canoes, kayaks, and boards up to the roof. When not in use, it stows neatly inside your RoundBar or CoreBar crossbar, ready and waiting for the next trip to the water. It's easier on your back, your boat and your car's paint job.
Product Details
- Telescoping boat load-assist arm helps you easily get big boats and boards up to your roof
- Protects kayaks, canoes, and your car from dings, scratches and dents
- Extends 28" from end of bar for superior clearance and ease of use
- Retracts into the bar for instant storage
- Corrosion-resistant material provides years of rugged use
- Fits Yakima CoreBar and RoundBar crossbars only
Product Specs
- Weight: 3.80 lbs
- Dimensions: L 36.50" x W 3.30" x H 3.00"

$49.00
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber.
- Secures the bow and stern of any boat
- Best in class corrosion resistance
- Clear plastic tubes protect your vehicle from damage

$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

$4.95
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty

$200.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

$45.00 - $55.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle.
- Foam padding protects boards and boats from damage
- Anti-slip material helps keep your gear in place
- Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories
- Fits most SUPs and fishing kayaks
- Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars

$130.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

$149.00
- Sold in pairs-combine them with rollers or saddles for a custom set-up
- Flexible saddle shape conforms to boat hull for secure full contact cradling
- Felt padded cradles protect hulls and are shaped for easy loading
- Tool free install to any cross bar
- Locks to base with SKS lock Cores for added security (sold separately)
- Premium HeavyDuty strap and bow/stern tie down included
- Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
Page 1 of 11
Next page